Production Machining

JUL 2018

Production Machining - Your access to the precision machining industrial buyer.

Issue link: https://pm.epubxp.com/i/995543

Contents of this Issue

Navigation

Page 47 of 55

PRODUCTS 46 PRODUCTION MACHINING :: JULY 2018 Parting-Off Blades Fit Onto VDI Turrets Seco Tools' line of 150.10-Jeti family of parting-off blades and square-shank blocks includes a VDI block design. Adapters hold the 150.10-Jeti parting-off blades onto the VDI turret and offer streamlined delivery of high-pressure coolant to the cutting zone without the use of hoses. These blades and adapters remove heat during parting-off operations. Coolant is delivered internally to the adapter through the turret and then reaches the cutting zone through the coolant holes in the blades. The transfer of coolant to the cutting edge is done by Seco's Jetstream Tooling technology. This expansion includes face mount adapters for VDI30, VDI40 and VDI50 turrets and star mount adapters for VDI25, VDI30 and VDI40 turrets. The adapters hold 20-mm and 25-mm HSS parting-off blades. The range is also compatible with MDT reinforced blades with internal coolant. :: Seco Tools LLC 248-528-5200 , secotools.com/us Ceramic Cutting Inserts Improve Productivity Walter USA's WCK10 ceramic cutting grade is optimized for roughing gray cast iron at high cutting speeds, with either continuous or interrupted cutting. The in- serts deliver improved productivity, process reliability and longer tool life because of a wear-resistant ceramic cutting material. Because the ceramic cutting material permits higher cutting speeds and higher cutting volumes than traditional solid carbide, production time and costs are reduced. In addition, the inserts feature a negative chamfer for longer tool life, stable dimple clamping and the ability to handle both wet and dry machining. :: Walter USA LLC 262-347-2400, walter-tools.com If you are micro-machining with your standard spindle, you are simply not optimizing your micro tool investment. The smaller the diameter, the faster a tool needs to run. RPM and accuracy are the rules of the game with micro-machining. NSK has the spindles that you need to maximize tool life and increase productivity. 1800 Global Parkway, Hoffman Estates, IL 60192 Phone: (847) 843-7664 | Toll Free: (800) 585-4675 | Fax: (847) 843-7622 info@nskamericancorp.com | www.nskameriacorp.com HES810-BT40 Are you getting full capacity out of your tools? R edefining P roductive M achining

Articles in this issue

Links on this page

Archives of this issue

view archives of Production Machining - JUL 2018