End Mills Double Feed Rates,
Shorten Cycle Times
Niagara Cutter, a subsidiary of Seco Tools, LLC, has launched
its Stabilizer 2.0 family of end mills. The cutters are designed
to incorporate continuous variable asymmetrical geometries
and provide smooth and chatter-free performance that allows
feed rates to be doubled as compared with previous models.
And because they handle twice the chip load capacity, the latest
versions shorten part machining cycle times and further boost
productivity.
Stabilizer 2.0 includes the ST430.2
series designed for steels, alloy steels and
cast iron as well as the ST440.2 HT series
for ISO-M and ISO-S materials, including
stainless steel, titanium and high-temp
alloys. In addition to the performance
boost provided by the new geometry, an
advanced AlTiN coating resists heat and
abrasion to optimize tool life.
The end mills come in diameters from
0.125" to 1.0" and 3 mm to 25 mm with
square corner and corner radii—based on
series and diameter—of 0.010", 0.020",
0.030", 0.060" and 0.120". Lengths are
1 × D, 2 × D and 3 × D, and shanks are
either cylindrical or if 0.375" or larger in
diameter have Weldon flats.
:: Niagara Cutter LLC
248-528-5200, niagaracutter.com
B LO G
productionmachining.com/blog
PRODUCTS
productionmachining.com :: 45