Production Machining

OCT 2016

Production Machining - Your access to the precision machining industrial buyer.

Issue link:

Contents of this Issue


Page 30 of 67

:: reCool provides through-tool-coolant capability to standard external-coolant live tooling heads on turning machine turrets. The reCool Mini (below) is designed for Swiss-type machines. For similar articles about cutting tools and related equipment, visit PM's Cutting Tools zone. LINK :: TECH BRIEF :: 29 coolant nozzles. Getting the spray close to the cut zone is often impossible. rough-coolant tooling and the reCool system always keep coolant pinpointed at the cutting tool's edge and precisely in the cut zone to evacuate chips and reduce heat, which ultimately shortens part machining cycle times. When drilling a deep hole, through-tool coolant eliminates having to engage a time-consuming pecking operation to pull chips out of the hole and relieve built-up heat. Shops can drill holes more quickly in one contin- uous feed. Also, because through-tool coolant controls heat better, parts can be machined at much higher speeds and feeds without the risk of excessive heat generation or premature tool wear. For more information from Rego-Fix Tool Corp., call 317-870-5959 or visit must be switched on and flowing prior to starting a cutting tool's rotation in the live head. Benefits e system has demonstrated higher efficiency than flood coolant to increase machine production. External flood coolant can be messy and time consuming, requiring machine operators to interrupt the process to re-adjust LIFTING CLEAN UP Booth C20046

Articles in this issue

Links on this page

Archives of this issue

view archives of Production Machining - OCT 2016