Production Machining

AUG 2014

Production Machining - Your access to the precision machining industrial buyer.

Issue link:

Contents of this Issue


Page 55 of 99

IMTS 2014 PRODUC TS Cutting Insert Ofers In- ternal Coolant Jet Horn USA Inc., Booth W-1722 Horn USA ofers its S100 cutting insert in the HP65 coating grade, featuring 3V geometry and measuring 3 mm (0.118") wide. Specifcally designed for groov- ing and parting-of stainless steels, the insert's TiAlN coating resists heat and wear. Coolant is discharged directly from the chipbreaker of the insert. The funnel- shaped nozzle creates an internal coolant jet, which works di- rectly on the cutting zone to reduce the formation of buildup and chipping of the cutting edge. Horn also ofers the S100 cutting insert in the AS45 carbide grade with EN geometry and a chip former to promote chip fow and sustain tool life even with long engagement times or at high temperatures. Toolholders featuring inter- nal cooling are available in both right- and left-handed versions with self-clamping or screw-down clamping to simplify insert replacements. :: Horn USA Inc. 888-818-4676 Multitasking CNC Lathe and More Ganesh Machinery Inc., Booths S-8045, S-8048 Ganesh Machinery unveils its latest multitasking CNC lathe and also features the Cyclone-76 TMY single turret, twin spindle, four- axis CNC turn-mill center; the Cyclone 52-BY2 B-axis, nine-axis multitasking lathe with 2" bar capacity, 36 available tools with 18 driven tools and 12 driven B-axis tools; and the Cyclone-32 CS 1.375" bar capacity, with 27 tools and 11 live tools, parts catcher with conveyor, chip auger 10 hp, 6,000 rpm spindle. :: Ganesh Machinery Inc. 888-542-6374 Mastercam's Dynamic Motion technology is remarkably fast, but it still holds the curves. For some toolpaths machine time can be cut by as much as 75%! And Dynamic Motion will help you get the most out of any machine – new or old. Mastercam has included Dynamic Motion for more than fi ve years and we are constantly expanding it across our entire product line. That means the speed and effi ciencies are built in to our software - there's no extra cost to you. If you need to see it to believe it, go to our website and look for our Dynamic Motion Technology Proving Ground. The time to shift gears is now. Once you do, your only speed will be ultra-fast. Be Dynamic. SHIFT GEARS! 54 PRODUCTION MACHINING :: AUGUST 2014

Articles in this issue

Links on this page

Archives of this issue

view archives of Production Machining - AUG 2014