Production Machining

NOV 2017

Production Machining - Your access to the precision machining industrial buyer.

Issue link: https://pm.epubxp.com/i/891400

Contents of this Issue

Navigation

Page 28 of 63

used. When using a cutoff tool, lubricant should be sprayed from underneath the cutting tool up into the cut. Spraying on the top side of the tool does not work because the entire cutting edge is covered by the chip being formed. When turning the end of the material or ODs, where the cutting tool is not entirely covered by the material, it is better to spray on the top side of the tool. e spray should be directed so that it hits the cutting edge and some lubricant lands on the material being machined. As the cutting edge moves through lubricant film on the material it will help lubricate the cutting edge. e existing coolant ports on a turning machine are used to route the MQL fluids to the toolholder on the turret. All but one of the ports are blocked off, and a nozzle designated for the specific holder is created. As with any external MQL nozzle, the MQL fluids need to be applied to the cutting tool/workpiece interface, so this approach allows the customization and positioning needed for each tool to be done independently. When the nozzle is not positioned correctly, lubricant often ends up applied to the cut chips, resulting in smoking and prema- ture tool wear because the tools are not getting the neces- sary lubrication. Like all MQL applications, proper steps need to be taken to ensure that the end results are successful. Paying atten- tion to and addressing all critical factors will help ensure the success of any MQL system. For more information from Unist Inc., call 800-253-5462 or visit unist.com. :: In turning operations, a single MQL nozzle is used for each station on the turret, attached to an existing coolant port on the turret or toolholder. All other open coolant ports should be plugged. Here's another article on this topic: A Foundation for Minimum Quantity Lubrication MQL can provide significant savings and improved per- formance in the right applications. Here are some impor- tant considerations when looking at this technology. LINK :: short.productionmachining.com/mqlube It's easy to say your tooling solves problems . It's harder to prove it. We prove it every day. 16 E. Piper Lane, Prospect Heights, IL 847-749-0633 info@heimatecinc.com www.heimatecinc.com Stuck on a tough tooling challenge? Let us help. Heimatec isn't just a world leader in live tools, angle heads and multi-spindle drill heads; we're your source for problem solving and tooling application expertise. With years of hands-on experience and the most innovative tooling, we are your TOTAL solution source. Put us to the test and send us your toughest tooling challenge. TECH BRIEF productionmachining.com :: 27

Articles in this issue

Links on this page

Archives of this issue

view archives of Production Machining - NOV 2017